Pharmaceutical Testing Instruments

Identify and prove the availability of active pharmaceutical ingredient API in their delivered form with the fully USP and EP compliant instruments from PHARMA TEST providing you with a full set of vessel USP Apparatus 2 paddles and a full range of high quality dissolution accessories. They use our MonoShaft™ tool system and include a full set of vessel and USP Apparatus 2 paddles as well to a full range of dissolution accessories depending on your needs.

Get the ultimate semi-automated dissolution testing systems from PHARMA TEST including a dissolution bath, a pump and a fraction collector which collects the sampled dissolution media at pre-programmed times which make the dissolution job easier and saves time, money and effort. The DSR-M systems can offer online dilution in addition to the sampling. Automated refilling of the collected media back into the testing vessels is possible for both the DFC and DSR-M systems.

Save time with the online automated dissolution systems from PHARMA TEST by automated sampling, measuring and result calculation where the samples are circulated in a closed loop which guarantees no volume loss over the time of the dissolution test leading to high quality absorbance reading or UV spectrum collection. The dissolution testing instrument can be equipped with a movable EPE auto sampling system, an ITM individual media temperature monitoring system, a manual or automated tablet drop magazine and 6 to 12 stirred testing stations.

Choose the only media preparation and degassing instrument with standard gravimetric dosing from PHARMA TEST and put your worries about media preparation behind. PT-DDS4 offers pre-heating to a temperature of 37°C and absolutely precise gravimetric dispensing according US FDA authorities. De-aeration is generally recommended to prevent the formation of bubbles on the dosage form surface, which may cause a variation in active dissolution rates, by virtue of surface obscuration.

Stay in compliance to the DIN EN ISO standard <9187-1/2:2010> with PHARMA TEST's Ampoule Breakpoint Tester with dual force modes, linear speed increase mode and force increase mode, built-in multiple point validation procedure and programmable print-out of force increase curve. The ampoule tester features automatic re-start facility to speed up the testing sequence, a 12 digit batch number and validation and calibration program for the measurement station.

Ensure the best quality of your packaging with Leak Test Apparatus from PHARMA TEST which offers easy operation by programmed sequence, fully automated microprocessor-controlled equipment, stainless steel housing to fit well into the production area as well as to IQ/OQ documents free of charge. The instrument is used to test the quality of the packaging process and to check that the seals enclosing the product are perfectly intact with compliance to USP monograph <1136>.

PHARMA TEST offers a complete range of instruments for powder testing from automated powder flow analyzer for the measurement of flow behaviour of granules and powders, to tapped density and apparent density testing instruments or to Scott Volumeter for the determination of bulk density. PHARMA TEST offers added benefts by combining flowability measurement with NIR (near-infrared) spectroscopy to give as much in-depth information about your powders as possible.

Meet the requirements of the valid EP and German DAB with suppository disintegration, penetration, dissolution, test instrument from PHARMA TEST and take advantage of the removal bath, sample holder, protected heating system against any fat or grease, IQ/OQ free of charge documents and much more. PHARMA TEST's suppository testing instruments are used to test the quality of suppositories, pessaries and creams includes disintegration and penetration testers.

Benefit from the range of tablet disintegration testing Instruments that PHARMA TEST offer from fully automated tablet disintegration testing to semi-automated tablet disintegration testing, single basket tablet disintegration tester, triple basket tablet disintegration tester and to disintegration basket add-on. The tablet and capsule disintegration testers are fully compliant with the current USP & EP Pharmacopeia and support A & B-type baskets for regular or larger samples.

Determine friability and abrasion of uncoated tablets with PHARMA TEST’s tablet friability testing instruments and choose from a single, double, triple or even six drum and program the instrument for number of drum revolutions or rotating time with fully USP <1216>, EP <2.9.7> and JP <14> compliant and come with a ready to use with friability („Roche“) drums included in the standard scope of supply. PHARMA TEST also offer abrasion drums as well as friability drums with anti-static coating.

Benefit from the wide range of high-quality tablet hardness testing instruments from PHARMA TEST and choose the right instrument depending on your samples and test thickness, weight, diameter and hardness of regular tablets, odd shaped tablets and other solid samples fully automatically. All PHARMA TEST's tablet hardness testing instruments meet the latest requirements of the USP and EP Pharmacopeia.